Stage & Touring

If you are a rental or installation company DJ or solo entertainer you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline elegant stands for this such as the LS 331 B from Gravity. However if you install a standard T-bar the combination appears clumsy and oversized. You don't need a clavilux just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm it blends seamlessly into any environment even museums and galleries. Thanks to the 17-mm TV spigot insert lamps can be easily clicked into position removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However despite its slimline elegance there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two two extra spigot inserts can be installed in the additional mounting holes. (These have been included) As you are probably already aware ergonomic locking screws interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Ā Width adjustable from 390-570 mm 17 mm TV spigot insert Lamps can be attached from above or below Compatible with all 35-mm stands Built-in Allen key holder 2 x Adam Hall SS 018 Spigots Ā

Read more less

Gravity LS FLOOR XB - Floor Stand for Spots foldable The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage hefty rubber feet prevent marring of the floor while providing a secure grip.Ā

Read more less

The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.Ā

Read more less

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Read more less

Lighting Stand and speaker stand with compact square steel base and off-centre mounting option. Compact heavy steel base for secure and stable standing Base with three M20 female threads and off centre mounting options 1.84m maximium height Conveninet carrying handle on the steel base Felt-covered feet for protection of the floor space

Read more less

Especially on tour it is important that all instruments equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity KSX2RD set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus this combination works in pretty much every situation no matter if you're playing in the studio or practicing in the rehearsal room. Measuring 100 cm wide and 48 cm deep its large table surface provides you with plenty of room to arrange your laptop DJ mixer controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool. In terms of set-up all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.

Read more less

Gravity KSX 2 - Keyboard Stand X-Form double The KSX 2 is a hardwearing double brace X-style keyboard stand with 65 kg load capacity. A quick release clamping lever provides easy adjustment with a maximum height of 90 cm. The powder coated steel construction features reinforced joints for superior durability and long lasting non-slip end caps.Ā

Read more less

Working with a laptop is all part of the day-to-day life of a DJ or studio technician which is why the GKSRD1S support plate was designed for keyboard stands. It helps to keep your precious equipment fixed in place and protect it from falling and like all other Gravity stands and tripods its extremely solid and sturdy design will truly win you over. Measuring 100 cm wide and 48 cm deep this powder-coated support plate offers enough space for virtually any type of set-up. At just over 6 kg in weight it is not only extremely stable but it can hold up to 60 kg. Take note here however that the X-stand itself can also accommodate just as much weight. The Gravity KSX2 for example is perfect for this purpose. The vents on the support plate's surface are just another well-thought-out detail: they help to cool laptops or other devices that generate a lot of heat. In terms of set-up all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.

Read more less

Probably the simplest and smartest DJ accessory in while. The Gravity HP-HTC-01 B is a clever headphone mount which can easily clamp to a desk or DJ table. You can even change the clamp angle by 90 degrees to mount the holder on to the side of a shelf. All the parts that come in to contact with your desk are padded to avoid scratching. This hanger clamps to any desk with 5 to 45 mm thickness to put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy and the plastic set screw tip protects your desk's finish.

Read more less

GS 08 WMB - Spring-loaded Wall Mount Guitar HangerĀ The GS 08 WMB (design registered)Āis a universal wall mount hanger for acoustic electric and bass guitars. The spring loaded yoke is self adjusting to accommodate any headstock and opens automatically when the instrument is lifted. It is coated with specially formulated rubber that provides a secure grip and does not mar the finish. Not recommended for guitars with nitro laquer.

Read more less

The FD Seat 1 from Gravity stands is an adjustable stool ideal for all types of musicians. Ā Made of metal with a breathable seat the chair can be adjusted in height and locked in to position. The ingenious height adjustment is based on a threaded rod but with a certain twist. For fine adjustment simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments however the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves And thirdly the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability. It is also foldable to allow easy transportation. Ā

Read more less

Sound technicians DJs and stagehands: Take the weight off your load with a multi-functional cart. The Gravity Cart chassis is made of steel to ensure rigidity. Two fixed and two rotating low-rolling resistance anti-slip rubber tyres provide extra manoeuvrability. The Gravity Cart is your trusty companion before and after every show. And the best thing is: The light-weight compact-folded multi-functional cart lifts easily from the tour bus while also performing effortlessly when fully loaded with equipment. With its (up to 0.98 m) extendable chassis and 150 kg load capacity your equipment is quickly and safely transported to and from the stage. And thanks to its optimal ergonomic design: without straining your back. Ā 8 in 1 Configuration Ergonomic design for easy handling Compact dimensions (670 x 405 x 805 mm) Easily extends to 0.98 m length Load capacity of up to 150 kg Light weight and portable Heavy-duty rubber (PU) tyres for maximum flexibility on a range of surfaces Ā

Read more less