rcf

The RCF ART 910-A is a compact yet powerful PA speaker ideal for stage monitoring or compact front of house PA system. Powered by an awesome 2100w Class D amplifier it produces up to 130dB SPL. ART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver 10" woofer two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 130 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 910-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing perfectly tuned for each model audiences will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 10" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 910-AX is a compact yet powerful PA speaker with built in 6 channel digital mixer bluetooth connectivity with stereo streaming and pairing.ĀĀ ART 910-AX is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver 10" woofer two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 130 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 910-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing perfectly tuned for each model audiences will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. The Class 1 BluetoothĀĀconnection can receive 2-channel audio streaming and provides a stereo or dual mono output for pairing with AX-featured RCF speakers. We tested over 100 meters (328 feet) free-field operability. Enjoy the convenience of BluetoothĀĀconnection when you have architectural constraints pedestrian areas or inaccessible signal connections. Manage ART 9-AX from your Smartphone or Tablet with LiveRemote App RCF LiveRemote App makes it easy to adjust ART 9-AX mixer DSP FX routing and BluetoothĀĀsettings. LiveRemote also allows full control of the internal ART 9-AX engine: recall and save presets set your desired volume levels adjust EQ compressors and FX customize and tune your sound system and much more. Available for Android and iOS phones and tablets. Built-in 6-channel Digital Mixer Advanced User Interface w touch panel and remote control 1.75" Compression Driver and 10" Woofer Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification Dual combo preamp with 48V Power and Mini-jack stereo line input BluetoothĀ stereo audio input with dual speaker pairing option True Resistive Waveguide FiRPHASE and Bass Motion Control POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 912-A is a compact and powerful PA speaker perfect for both stage monitoring and front of house PA system. Powered by the new 2100w Class D amplifier module it produces up to 130dB SPL. ART 912-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver 12" woofer two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 130 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 912-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing perfectly tuned for each model the audience will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 912-AX is a compact yet powerful PA speaker with built in 6 channel digital mixer bluetooth connectivity with stereo streaming and pairing.ĀĀ ART 912-AX is a top-notch solution for any audio application featuring 48V microphone preamps and line inputs an internal 6-channel digital mixer with advanced DSP BluetoothĀ stereo audio input with dual speaker pairing option. The combination of a 1.75" compression driver 12" woofer and two-channel 2100W amplifier produces 100Ā x 60Ā constant directivity coverage for the listening area with up to 130 dB SPL distortion-free sound. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. The Class 1 BluetoothĀĀconnection can receive 2-channel audio streaming and provides a stereo or dual mono output for pairing with AX-featured RCF speakers. We tested over 100 meters (328 feet) free-field operability. Enjoy the convenience of BluetoothĀĀconnection when you have architectural constraints pedestrian areas or inaccessible signal connections. Manage ART 9-AX from your Smartphone or Tablet with LiveRemote App RCF LiveRemote App makes it easy to adjust ART 9-AX mixer DSP FX routing and BluetoothĀĀsettings. LiveRemote also allows full control of the internal ART 9-AX engine: recall and save presets set your desired volume levels adjust EQ compressors and FX customize and tune your sound system and much more. Available for Android and iOS phones and tablets. Built-in 6-channel Digital Mixer Advanced User Interface w touch panel and remote control 1.75" Compression Driver and 10" Woofer Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification Dual combo preamp with 48V Power and Mini-jack stereo line input BluetoothĀ stereo audio input with dual speaker pairing option True Resistive Waveguide FiRPHASE and Bass Motion Control POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 915-A is a powerful PA speaker ideal for a live sound or a DJ PA system. Powered by a 2100w Class D amplifier module it can produce up to 131dB SPL. ART 915-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver 15" woofer two-channel 2100W amplifier and a constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 131 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 915-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing perfectly tuned for each model the audience will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it is easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 131 dB Sound Pressure Level 2100W Class-D Bi-Amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 15" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

ART 915-AX is a top-notch solution for any audio application featuring 48V microphone preamps and line inputs an internal 6-channel digital mixer with advanced DSP BluetoothĀ stereo audio input with dual speaker pairing option. The combination of a 1.75" compression driver 15" woofer and two-channel 2100W amplifier produces 100Ā x 60Ā constant directivity coverage for the listening area with up to 131 dB SPL distortion-free sound. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. The Class 1 BluetoothĀĀconnection can receive 2-channel audio streaming and provides a stereo or dual mono output for pairing with AX-featured RCF speakers. We tested over 100 meters (328 feet) free-field operability. Enjoy the convenience of BluetoothĀĀconnection when you have architectural constraints pedestrian areas or inaccessible signal connections. Manage ART 9-AX from your Smartphone or Tablet with LiveRemote App RCF LiveRemote App makes it easy to adjust ART 9-AX mixer DSP FX routing and BluetoothĀĀsettings. LiveRemote also allows full control of the internal ART 9-AX engine: recall and save presets set your desired volume levels adjust EQ compressors and FX customize and tune your sound system and much more. Available for Android and iOS phones and tablets. Built-in 6-channel Digital Mixer Advanced User Interface w touch panel and remote control 1.75" Compression Driver and 10" Woofer Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification Dual combo preamp with 48V Power and Mini-jack stereo line input BluetoothĀ stereo audio input with dual speaker pairing option True Resistive Waveguide FiRPHASE and Bass Motion Control POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR TRANSDUCERS Lightweight and powerful RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. HIGH FREQUENCIES The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity enhancing transient response and improving coupling with the low-frequency transducer. LOW FREQUENCIES Low-frequency transducer design gains more stability over higher currents with less distortion and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 932-A is a high quality and powerful PA speaker perfect for front of house PA system. Powered by the new 2100w Class D amplifier module and featuring a 3" Neodymium compression driver it is capable of producing up to 132dB SPL. ART 932-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titaniumneodymium compression driver 12" woofer - two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 132 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 932-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing perfectly tuned for each model the audience will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 132 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" TitaniumNeodymium Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR COMPRESSION DRIVERS The ND840 Compression Driver in pure Titanium with a 3 voice coil allows a crossover point at only 800 Hz. This allows a better impulse response fast decay and superior efficiency. Lightweight and powerful RCF neodymium drivers are a reference in performance and reliability. POTENT WOOFER The low-frequency transducer is a high-power 12" woofer with a 2.5 voice coil that delivers tight punchy bass. Reproduction of the mid-bass frequencies is accurate transparent and free from distortion. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 935-A is a high quality and powerful PA speaker perfect for front of house PA system. Powered by the new 2100w Class D amplifier module and featuring a 3" Neodymium compression driver it is capable of producing up to 133dB SPL. ART 935-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titaniumneodymium compression driver 15" woofer two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 133 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 935-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing perfectly tuned for each model the audience will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 133 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 3" TitaniumNeodymium Compression Driver 15" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR COMPRESSION DRIVERS The ND840 Compression Driver in pure Titanium with a 3 voice coil allows a crossover point at only 800 Hz. This allows a better impulse response fast decay and superior efficiency. Lightweight and powerful RCF neodymium drivers are a reference in performance and reliability. POTENT WOOFER The low-frequency transducer is a high-power 12" woofer with a 2.5 voice coil that delivers tight punchy bass. Reproduction of the mid-bass frequencies is accurate transparent and free from distortion. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

The RCF ART 945-A is the flagship model of the ART 9 Series. Powered by the same 2100w Class-D amp module driving a 4" Neodymium compression driver as well the 15" woofer also made of Neodymium. This produces the highest quality sound a lighter than usual cabinet and output of up to 135dB SPL. ART 945-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of neodymium transducers - 4" titanium compression driver 15" woofer - two-channel 2100W amplifier and the constant directivity True Resistive Waveguide produces coherent 100Ā x 60Ā coverage for the listening area with up to 135 dB SPL distortion-free sound. Used as a stand-alone speaker for a FOH system satellite (with subwoofer) stage monitor or flown the ART 945-A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing perfectly tuned for each model the audience will experience absolute clarity and deep powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement making it easy to carry and secure to install on a pole flown- wall- or truss-mounted using the multiple rigging points available. Up to 135 dB Sound Pressure Level 2100W Class-D Bi-Amplification 45-20000 Hz linear frequency response 4" TitaniumNeodymium Compression Driver 15" Neodymium Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management POWER THAT MOVES The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful so the amplifier follows the evolution. With 2100 Watts of power the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models able to manage extremely high sound pressure levels with an ultra-fast attack realistic transient response and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. M-BRACE: A NEW CABINET DESIGN A professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier preventing any deformation for a completely inert body with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure for greater resistance to mechanical stress. BASS MOTION CONTROL When searching for an extended bass with enhanced performance RCF engineers found a way to remove the high-pass filter replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control) the newly advanced woofer excursion management feature. ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology ART 9 has a level of DSP audio performance never achieved in this range of speakers. NEW PARADIGMS IN ELECTROACOUSTICS The advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology the new shape and the placement of the ports the speaker now acts as a single ideal source for a perfect sound image. Acoustically the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama. SUPERIOR COMPRESSION DRIVERS The ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response fast decay and superior efficiency. Lightweight and powerful RCF neodymium drivers are a reference in performance and reliability. READY FOR HEAVY-DUTY APPLICATIONS The highly innovative entertainment industry is permanently evolving accompanied by increasing demands on interconnection systems. Particular environmentally sealed connectors are highly requested for heavy-duty and harsh environment applications of entertainment equipment. ART 945-A features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedized sealed connectors feature not only IP protection but also UV resistance approved according to UL50E. POTENT WOOFER The low-frequency transducer is a high-power 15 neodymium woofer with a 3.5 voice coil that delivers tight punchy bass. Reproduction of the mid-bass frequencies is accurate transparent and free from distortion. NEW PERSPECTIVE ON LINEARITY RCF speakers are designed using a proprietary and advanced digital FiR technology conceived to deliver transparent sound absolute clarity and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions ensuring minimum latencies in the system.

Read more less

RCF ART COVER 312 Protection cover for all ART Series 12" and 15" loudspeakers.

Read more less

RCF ART COVER 710 Protection cover for ART 710-A and ART 410-A

Read more less

Ā AYRA PRO5 studio monitor works perfectly in any listening environment whether large or small production facilities with absolute clarity. It delivers accurate monitoring and provides the engineer or producer with a neutral tool to analyze recordings and optimize the mix; for this reason we call it PRO. Featuring a dedicated powerful internal DSP that optimizes frequency response and dynamics together with the exclusive RCF FiRPHASE processing and selected components the AYRA PRO is the first Studio Monitor in its class to boast an outstanding 0Ā phase response. 50 20 kHz Frequency Response 0Ā Phase Response 75W + 25W Class-D Amplifiers 5 Composite Fiberglass Woofer 1 ferrofluid cooled Soft Dome tweeter RCF Precision Waveguide DSP Processing with FiRPHASE Low distortion frontal Vented Ports

Read more less