Enhance your performance and setup with our range of DJ Stands, designed for maximum reliability and convenience. Whether you're in need of a portable solution or a stable platform for your equipment, find it all here.
DJ Stands
Equinox Equinox Truss Booth System
This lightweight compact and collapsible Equinox Truss Booth system is perfect for professional DJs and comes supplied with a sturdy shelf cross bars and white front board for your own branding.Lightweight compact and collapsible Truss Booth - System includes: 4 sided folding Truss Booth with white front board for your own branding shelf support cross bars and 1 carpet covered shelf. - Tube Diameter: 32mm
£359.00 £329.00
Gravity Stands Gravity SP 2332 B Adjustable Speaker Pole
The SP 2332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 2332 B features an M20 bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport. ĀĀ
£19.00
Gravity Stands Gravity BG RD C
Especially on tour it is important to protect your equipment from possible damage so that you can enjoy it for a very long time. Using the Gravity BG RD C cover which is perfectly matched to the KSX 2 RD you can protect your set-up from scratches and also keep it looking clean. Because the fine velvet material can also elegantly conceal unsightly cable runs or the usual cable tangle under the Rapid Desk. Even if the cover is illuminated with a light it does not become transparent. In short: The Gravity BG RD C cover protects your Rapid Desk and keeps the look of your set-up nice and tidy.
£29.00
Glorious Dj Glorious DJ Mix station 2
Glorious Mix Station 2 - DJ Workstation Glorious DJ, known for their DJ-focused furniture, has updated the Mix Station to create the Mix Station 2. This DJ workstation is designed to be sturdy and anti-vibration, offering a spacious and ergonomic setup for both traditional and digital DJ configurations. Key Features Spacious Surface Design: Offers ample space for two turntables or CD/media players and a mixer (up to 14" width), or a DJ controller with a laptop.Sturdy Anti-Vibration Construction: Solid particle board construction with a black finish for stability and vibration reduction.Flexible Turntable Positioning: Turntables can be positioned vertically or horizontally (length variants included).Ergonomic Height: Designed for comfortable mixing.Cable Management: Cable outlets on the front and side panels for organized cable routing.Matching Design: Visually matches the Glorious Modular Mix series and Vinyl Storage furniture.Easy Assembly: Quick and straightforward setup. Technical Specifications Compatibility:2 turntables or CD/media players and 1 mixer (up to 14" width)or 1 DJ controller with laptopConstruction: Particle boardFinish: BlackFeatures: Cable outlets, adjustable turntable positioning What's in the box Glorious Mix Station 2Length variants for turntable positioningAssembly hardwareAssembly instructions
£189.00 £99.00
Gravity Stands Gravity MA TRAY 1 - Microphone Stand Tray
Gravity MA TRAY 1 - Microphone Stand Tray 360Ā adjustable steel trayĀ The MA TRAY 1 is a 360Ā adjustable steel tray that easily attaches to any microphone stand. The 250 x 195 mm size is large enough to accomodate tablet computers and holds accessories such as capos picks or small percussion instruments.
£20.00
Misc Supplier Portable Tripod Laptop Stand with Mouse Shelf
A portable tripod height adjustable laptop stand with adjustable tilt top and separate mouse shelf. Ideal for DJs or Musicians this laptop stand will hold laptops as well as mixers effects units or lighting consoles capable of holding a 15 kg maximum weight.
£30.99
Gravity Stands Gravity LTS T 01 Laptop Stand
Compact and lightweight laptop stand Tray with adjustable holding pins Suitable for laptops tablets smaller mixers and effects Tray can be tilted by 180 degrees
£69.00
Gravity Stands Gravity FD Seat 1
The FD Seat 1 from Gravity stands is an adjustable stool ideal for all types of musicians. Ā Made of metal with a breathable seat the chair can be adjusted in height and locked in to position. The ingenious height adjustment is based on a threaded rod but with a certain twist. For fine adjustment simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments however the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves And thirdly the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability. It is also foldable to allow easy transportation. Ā
£69.00
Gravity Stands Gravity KSX 2 RD - Mobile DJ Stand
Especially on tour it is important that all instruments equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity KSX2RD set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus this combination works in pretty much every situation no matter if you're playing in the studio or practicing in the rehearsal room. Measuring 100 cm wide and 48 cm deep its large table surface provides you with plenty of room to arrange your laptop DJ mixer controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool. In terms of set-up all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.
£75.00
Gravity Stands Gravity TSP 5212LB Speaker Stand
The hard conditions and extreme time pressures of touring are for strong workers and robust materials only - such as the Gravity Touring series speaker stand. Extremely sturdy with three double-braced legs and a die-cast aluminium mounting bracket. Especially strong steel tubing for a 50 kg load capacity. Set-up and take-down are extremely quick and safe thanks to the automatic snap-in LockPinĀ. The 35 mm extension pole is locked into place and the pin can only be unlocked with the release lever. The loudspeaker stand can be adjusted to a height of up to 194 cm. The locking screws with solid unlosable metal knobs are an invaluable advantage when touring. Ideal for rental and event organisers Extremely robust steel construction Double-braced legs Die-cast aluminium mounting bracket Automatic LockPinĀ Unlosable metal knobs.
£65.00
Gravity Stands Gravity LS 431B - Lighting Stand Black
The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.
£139.00 £125.00
Novopro Novopro SMS50R Studio Monitor Desktop Stand (Pair)
A pair of studio monitor desktop stands with unique adjustable angle top plates that allow for perfect speaker and directional audio positioning High quality studio monitor stands for desktop placement Adjustable height up to 380mm 15 inches Variable tilt angle on top plate for precision placement and directioning within a studio Fitted with non-slip anti-resonance rubber isolating feet Height is from 240mm to 380mm 9.4 to 15 inches Base plate is 250mm x 250mm Top plate is 224mm x 232mm Maximum load: 30Kg 66lb Material: 35mm 1.37 inches and 41mm 1.6 inches steel pole and base Surface and colour: black powder coated Weight: 2.15Kg 4lb 11oz Ā Kit includes the following: 2 x SMS50R monitor speaker stands 2 x sets of anti-slip foam 1 x instruction manual Ā Ā
£49.00
Novopro Novopro STP100B-2m scrim sock Black
The Novopro STP (Scrim Truss Podium) socks are placed around your truss podiums or lecterns to give you that professional scrim appearance. Available in 1m and 2m lengths small or larger truss sizes with or without velcro and in either black or white scrim finishes the STP range will solve your scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim sock to stretch around the metalwork they create a material finish that can either be used to blackout or be illuminated for some creative effects. Standard scrim versions are installed by simply placing over your truss. The V (for velcro) versions have male and female velcro along the long edge so that they can be fitted around a podium or lectern where it is not easy to slide scrim over the unit or fitted to truss where you wish to add scrims after a truss structure has already been assembled. STP100 series will fit truss that has an outer perimeter of 520mm to 850mm including Trilite 100 series tri quad truss and 200 series tri truss along with small to medium sized trussing from other manufacturers. STP200 series will fit truss that has an outer perimeter of 850mm to 1300mm including Trilite 200 series quad 18+ truss along with medium to large sized trussing from other manufacturers. The Novopro STP range are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.
£19.95
Gravity Stands Gravity RP 5555 GRN 1 - Universal Gravity Ring Pack
Gravity RP 5555 GRN 1 - Universal Gravity Ring Pack Sheen Green Universal Ring Pack suitable for all Gravity products Ā
£3.60
Gravity Stands Gravity SF 36 M10 M - Reducer Flange
Gravity SF 36 M10 M - Reducer Flange 36 mm to M10 male The SF 36 M10 M lets you attach devices with M10 nut mounting to a 35mm pole. Ideal for PAR lights.
£11.60
Gravity Stands Gravity SF 36 Z 38 M - Reducer Flange
Gravity SF 36 Z 38 M - Reducer Flange 36 mm to 38" male The SF 36 Z 38 M lets you attach devices with 38" bolt mounting to a 35mm pole. Ideal for microphone clips and boom arms.
£12.00
Gravity Stands Gravity SP 5211 B - Speaker Stand
The SP 5211 B is a classic tripod speaker stand made from thick walled yet lightweight powder coated aluminium tubing with a load capacity of 50 kg and 192 cm maximum height.Ā The die cast aluminium leg collar has been completely redesigned to provide superior durability and longevity the height adjustment collar is made of steel for additional strength and is virtually indestructable. It features a safety pin to securely lock the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. A set of black coding rings is included with the SP 5211 BĀ additional ring packs are available in a wide array of colors for instant personalization.
£43.00
Gravity Stands Gravity MS 43 - Straight Microphone Stand With Folding Tripod Base
The MS 43 is a premium quality microphone stand with thick walled tubing powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection. For easy height adjustment the MS 43 sports a smooth durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. TheĀ custom designed retainer requires no tools for quick and secure microphone clip attachment. A set of black coding rings is included with the MS 43 additional ring packs are available in a wide array of colours for instant personalization.
£29.00 £14.99
Rhino Stands Rhino Multi Clamp
Designed to quickly mount a light effect to a lighting stand and allow the light to be rotated 360 degrees. This revolutionary design quickly converts this 2inch (52mm) clamp into 2 other sizes. Clamps the full diameter of the bar to stop slippage and leaves it in unmarked condition.
£7.00
Novopro Novopro LS25 Pro Laptop Stand and Bag
Novopro LS25 Pro laptop stand and bag Professional Alloy laptop stand Deluxe professional producerDJ laptop stand Aluminum alloy structure Quick open and fold system With a second tray for soundcard or IO device Thin small and lightweight but built for the rigors of the road With a carry bag for storage and transportantion Open size:26.5*22.7*30CM Foldedclosed size: 30*26.5*2.5CM Net Weight: 1.07Kgs
£69.00 £39.00
Heavy Duty Lighting Stand With T Bar
Heavy duty aluminium lighting stand with a heavy duty foldable tripod and robust height adjustment clamps. 120cm length aluminium T-bar Supplied with fixing bolts for light effects 4 x M10 hole on T bar for suspending lighting par cans
£79.00
Novopro Novopro PS1XL Moving Head Podium Stand
The Novopro PS1XL Moving Head / Podium Stand is a robust and versatile solution for DJs, venues, and event organizers seeking to showcase their lighting effects and enhance stage presence. Designed with professional-grade materials, the PS1XL offers stability and flexibility for mounting a wide range of lighting and special effects equipment. Key Features Adjustable height mechanism for tailored setup, ranging from 2.9 ft to 7.2 ft. Durable construction with a maximum load capacity of 60 kg, ensuring safety and stability for your equipment. Easy assembly and disassembly, making it perfect for mobile DJs and touring performances. Includes a white scrim to create a sleek, professional look and a carry bag for convenient transportation. Non-slip rubber feet for enhanced stability and floor protection. Why Choose the Novopro PS1XL? Whether you're enhancing your DJ booth, setting up a sophisticated lighting display, or adding a dramatic effect to your performance, the Novopro PS1XL Stand offers unparalleled support and versatility. Its robust design and ease of use make it an essential addition to any professional performance setup. Upgrade your show with the Novopro PS1XL today.
£159.00 - £565.00
Gravity Stands Gravity SP 3202 VT- Vari- Tilt Studio Monitor Speaker Stand
The Gravity GSP 3202 VARITILTĀ monitor speaker stand features a heavy triangular cast iron base and 25 x 25 cm steel tray with isolating foam rests and variable tilt up to 10Ā. It is height-adjustable from 90 to 150 cm for optimum speaker positioning and comes with a set of spikes that mount to the large integrated rubber feet for superior acoustic coupling to the floor. Solid cast iron base Steel tray with isolating foam stripsBlack powder coating finish 50 kg load capacity Set of spikes included
£56.00
Gravity Stands Gravity SP 5211 W - Speaker Stand (White)
The SP 5211 W is a classic tripod speaker stand made from thick walled yet lightweight powder coated aluminium tubing with a load capacity of 50 kg and 192 cm maximum height.The die cast aluminium leg collar has been completely redesigned to provide superior durability and longevity the height adjustment collar is made of steel for additional strength and is virtually indestructable. It features a safety pin to securely lock the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. A set of black coding rings is included with the SP 5211 BĀ additional ring packs are available in a wide array of colors for instant personalization.
£46.00
