Description
The Laserworld CS-2000RGB FX MK3 hasĀthree grating effectsĀbuilt in in addition to the graphics capable scanners:Āline grating and burst gratingĀ. Together with the ca. 130 (layers tunnels fences waves etc.) stored on the laser these effects offer a variety of combinations for impressive illumination of medium-sized to large locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time. The resultingĀextensiveness allows for effects that could not be achieved in any other way. But that's not everything the Laserworld CS-2000RGB FX MK3 has to offer: Ā The Laserworld CS-2000RGB FX MK3 is a pure diode analog modulated full color RGB laser system with a total output power ofĀup to 1'600 mWĀand a guaranteed output power of . The red laser source has an output power of 250 mW 635 nm the green of 250 mW 520 nm and theĀroyal-blueĀlaser source has an output power of 1'100 mW 450 nm. The diode laser sources ensureĀpowerful laser beams. The projector has good beam specifications with aĀbeam diameter of ca. 4 mmĀand beamĀdivergence of 1.1 mrad. The galvo system has aĀscan speed of up to 28kpps 8Ā ILDA. Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.Ā There is no airflow in the optical compartment the temperature is regulated through the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum. ThroughĀDMX in theĀstand-alone modeĀas well as in theĀsound-to-lightĀmodeĀabout ca. 130 (layers tunnels fences waves etc.)Ācan be projected in different colors and in various speed. If the stand-alone mode is active the pre-programmed patterns run without assistance and in the sound-to-light mode the laser system projects according to the sound. Next to the modes mentioned above this laser projector provides aĀmaster-slave-mode. Show lasers of the same series (slave projectors) connected via DMX cable to a main projector (master projector) project the same patterns like the master projector. The Laserworld CS-2000RGB FX MK3 isĀcomputer controllable through a professional ILDA interface. ThusĀown or pre-programmed lasershows logos texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller). There areĀsafety featuresĀlike a key switch an interlock and an on-off switch. The Laserworld CS-2000RGB FX MK3 show laser projector comes with aĀcompactĀhousing which isĀlight weightĀand has a stable bracket. The 360Ā mounting bracket allows forĀdifferent mounting positions:Āa hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows but also for fixed installations at a truss or at the ceiling. The Laserworld CS-2000RGB FX MK3 is ideal forĀsemi-professional applicationsĀand is perfectly suitable inĀmedium sized to large clubs and discosĀas well as forĀmobile DJs private useĀand in any other party location. Ā 1.6 W pure diode RGB laser system two additional grating effects: Line and Burst DMX controllable master-slave operation possible Full diode projector - no DPSS anymore Computer controllable via ILDA Plug play: Sound-to-light and stand-alone modes Capable of basic graphics - 28kpps 8Ā ILDA scanners Full color with analog modulation Front panel laser beam masking plate 360Ā mounting bracket
